What problems are prone to occur when using the faucet

Possible reasons: The water pressure is too low, causing the bubbler to be unable to generate air bubbles

Solution: Remove the faucet and replace it with a new aerator

Possible causes: Improper installation, deformed rubber ring, uneven or too thin outlet fittings, or the hose does not match the faucet.

Solution: Select the appropriate hose and faucet according to the specifications, replace the rubber ring and reinstall.

Possible reasons: The power of the water heater is insufficient, and the temperature is not adjusted in place

Solution: Adjust the temperature control button or buy enough water heater

Shower maintenance tips

Ask experienced professionals for construction and installation. When installing, the shower should try not to collide with hard objects, and not leave cement, glue, etc. on the surface, so as not to damage the gloss of the surface coating. Special attention should be paid to removing the debris in the pipeline before installation, otherwise, the shower will be blocked by debris in the pipeline, thus affecting its use.

Under the condition that the water pressure is not lower than 0.02mPa (ie 0.2kgf/cm3), after using for a period of time, if you find that the water output decreases or even the water heater goes out, you can lightly tap the water outlet of the shower. Unscrew the screen cover, remove impurities, and generally return to normal. But remember not to forcibly disassemble the shower, due to the complex internal structure of the shower, non-professional

Do not use too much force when switching the shower faucet and adjusting the water outlet of the shower, just turn it gently. Even traditional faucets don't require a lot of force. Pay special attention not to use the faucet handle and shower bracket as a handrail to support or use.