How to repair the leaking shower

People use showers in daily life, so long-term use or some careless behaviors may cause water leakage and damage to the shower. At this time, people need to know how to repair the water leakage of the shower.

First, the shower leak repair method

1. Unscrew the showerhead from the steering ball ring, take out the seal inside and replace it, and then turn the showerhead back to its original position.

2. Select the appropriate shower hose and faucet according to the specifications, replace the rubber ring on it, and re-install it. First, unscrew the showerhead handle from the hose with the strap pliers. Clean the threads on the handle of the showerhead, and apply special adhesive for water pipes or special tape for water pipes all around. Then screw the showerhead back to tighten, and remove any excess adhesive or tape.

3. Unscrew the showerhead for cleaning. If necessary, soak the parts with vinegar to facilitate scrubbing the parts. At the same time, pay attention to avoid scratching the parts.

4. Rotate and adjust the showerhead. If the rotation is not working, you can choose to open a small round cap in the middle of the showerhead with a screwdriver, then open the showerhead and rinse it with water, or brush it with a toothbrush, and then install and restore it.

Second, the general location of shower leaks

1. Water leakage from the gap at the bottom of the faucet bolt

2. Water leakage at the joint of the faucet

3. The faucet has no water outlet leaking

4. Water leakage from the showerhead

5. The shower head hose is leaking

6. Water leakage at the connection between the nozzle and the nozzle handle